New Zealand +64 7 579 0190
Australia 1800 766 661 (toll free)
USA +64 7 579 0190
Introducing our NEW Hampton peg and pole tent. This has the elegance of a traditional pole marquee teamed with the optimum performance of a fully engineered tensile membrane. The Hampton will create an unforgettable atmosphere with it's clean roof lines and stunning design. For ease of use, adaptability and cleaning this tent can be used as a one pole (9.7m x 9.7m) two pole (9.7m x 15.7m – 6m mid-section) or a three pole (9.7m x 21.2m – 12m mid-section) - just add and remove sections as the event requires, you can even add extra length to the tent by adding poles and mid sections accordingly.
The Hampton is only sold in Ferrari F402 Champagne.
The side and centre poles are all alloy 'Timbertec' coated to give a realistic wooden finish.
These beautiful marquees are fully engineered and manufactured for optimum performance in challenging weather conditions. Very quiet and stable in windy conditions.
Manufactured onsite at our purpose built premises in Tauranga, New Zealand.
Fabric: The Hampton is only sold in Ferrari F402 Champagne. All Baytex Marquees have a high tech lacquer surface coating for a smooth, glossy, dirt resistant finish. Fire retardant fabric specially treated to prevent moisture wicking. High frequency welded for optimum strength, fabricated in NZ.
Hardware: The side & centre poles are all Alloy ‘Timbertec’ coated to give a realistic wooden finish. Side pole height as standard 2.1m. Supplied with ratchet strap guy tensioners for tensioning effectiveness.
Simple Set Up: Quick and easy installation.
Easy to Clean: The PVC surface can be readily cleaned with PH Neutral Baytex 'Sliktop'.
Manufacturing: CAD designed and computer cut for dimensional accuracy. Manufactured onsite at Baytex for the last 40 years.
Engineering Reports: Charges for initial and renewal certificates will apply.
The Hampton is supplied with: PVC Roof, plain PVC Walling, poles, pegs, storm guys, roof bag, wall bag.
Number of Peaks | 2 |
Main frame profile OD (MM) | Alloy 'Timbertec' coated Poles |
Packed weight (kg) | 620 |
Packed volume (m3) | 2.203 |
Longest length (m) | 4.1 |
Leg height | 2.1m |
Apex height | 5.4m |
Max wind speed rating | 70 kph |
Area (m2) | 147 |
Standing | 147 |
Long Tables | 60-108 |
Round tables | 56-80 |
9.7m x 9.2m Roof Ends PVC | 1 |
9.7m x 6m Low Mid Roof PVC (with Bags) | length dependent |
3m x 2.1m Plain Walls | 14 |
Wall Bag | 2 |
9.7m x 9.2m Ends Alloy Centre & Wall Poles with standard feet | 1 |
9.7m x 6m Mid Section Alloy Centre & Wall Poles with standard feet | length dependent |
Walling Bars | 14 |
Marquee Pegs - 2 per leg | 28 |
Marquee Pegs - 2 per centre pole | 6 |
Marquee Pegs - 1 per ratchet strap | 28 |
Ratchet Straps with PVC Cover | 28 |
Flags | length dependent |
Colour | |
---|---|
Ferrari 402 Translucent Champagne | + |
Introducing our NEW Hampton peg and pole tent. This has the elegance of a traditional pole marquee teamed with the optimum performance of a fully engineered tensile membrane. The Hampton will create an unforgettable atmosphere with it's clean roof lines and stunning design. For ease of use, adaptability and cleaning this tent can be used as a one pole (9.7m x 9.7m) two pole (9.7m x 15.7m – 6m mid-section) or a three pole (9.7m x 21.2m – 12m mid-section) - just add and remove sections as the event requires, you can even add extra length to the tent by adding poles and mid sections accordingly.
The Hampton is only sold in Ferrari F402 Champagne.
The side and centre poles are all alloy 'Timbertec' coated to give a realistic wooden finish.
These beautiful marquees are fully engineered and manufactured for optimum performance in challenging weather conditions. Very quiet and stable in windy conditions.
Manufactured onsite at our purpose built premises in Tauranga, New Zealand.